how should i fix this? (pics)
how should i fix this? can i do it my self or should i bring to a body shop?
http://memimage.cardomain.net/member...62_93_full.jpg http://memimage.cardomain.net/member...62_94_full.jpg funny thing is that my buick had the same problem and in the same spot. u guys might wanna check your passenger side rear wheel well for the same thing. |
Looks like its only surface rust?
sand it down and get out all the rust cover with primer and under coating. |
do i break off the loose under coating?
|
You can pick at it but be carefull not poke a hole in the weak metal.
Better to use a wire cup brush and a grinder to clean that gunk up. |
Originally Posted by L27Buick
do i break off the loose under coating?
|
Yep, mine did that in the same place! I cleaned it up, neutralized the rust and put some underbody filler to fill it up. You'd never know something was there now.
|
Make sure you use a rust neutralizer like Foote did. Then once you are all set hit it with some rubberized undercoating ... once it gets dirty again even you'll have trouble telling.
|
whats a rust neutralizer? would a primer have a rust neutralizer in it?
|
When you go get paint, look a bit to one side of the spray paints. You'll find all kinds of rust neutralizers. Some turn rust into primer, some require a primer coat afterwards...
|
It's good stuff that stops rust.
|
All times are GMT -4. The time now is 03:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands