Will my series 1 parts fit this motor
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jan 2007
Location: Chillicothe,IL
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Will my series 1 parts fit this motor
I have found a Long block for a 95 Buick. Am wondering if all my series one parts will bolt up, or do I need series 2 stuff for it.
Am talking, manifolds, intakes ETC
here are the block and head numbers incase they help.
Heads are 2136, block is 24502441, crank is 2170. there is also a tag on the side of the block that is stamped 1340015d 030 010 020. I assume this is .030 overbore, .010 and .020 crank
This motoris on EBAY at moment and am thinkin if my stuff will bolt up could be a good buy for me.
Cheers AJ
Am talking, manifolds, intakes ETC
here are the block and head numbers incase they help.
Heads are 2136, block is 24502441, crank is 2170. there is also a tag on the side of the block that is stamped 1340015d 030 010 020. I assume this is .030 overbore, .010 and .020 crank
This motoris on EBAY at moment and am thinkin if my stuff will bolt up could be a good buy for me.
Cheers AJ
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Jan 2007
Location: Chillicothe,IL
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
it doesn't say if it was SC or N/A. it is a NAPA Long Block, never been installed. thats why i gave block and head numbers as someone may be able to shed more light as to what it is and if I can use it.
They are askin $495 for it IF I remember correctly
AJ
They are askin $495 for it IF I remember correctly
AJ
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Jan 2007
Location: Chillicothe,IL
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
#8
Member
Posts like a V-Tak
Thread Starter
Join Date: Jan 2007
Location: Chillicothe,IL
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
so would need new lower mahifold and exhaust manifold......anything else......tryin to work out if this could be a good option. Thanks
AJ
AJ
#9
Senior Member
Certified Car Nut
You'd need a UIM, TB, air intake, accessory brackets, PCM reprogram to calibrate the MAF/TB combo to the Series I PCM, fuel rail, injectors probably...
Find another option.
Find another option.
Thread
Thread Starter
Forum
Replies
Last Post
Jim0170
Detailing & Appearance
1
10-21-2006 02:38 PM