Swapping Parts?
10-23-2002, 09:55 PM
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Oct 2002
Location: N.W. Indiana
Posts: 1,206
Likes: 0
Received 0 Likes
on
0 Posts
Swapping Parts?
'98 Bonnie SLE
3.8 N/A Series II
Im new to the forum and need some help getting started. Im going from a Accord to a Bonnie and need some basic info. I was wondering what type of engine and tranny do we have. Like in the Accord it was a 3.0 but the series was J30A1. Also are there any known parts that can be swapped from any other GM 3.8 or websites. Thanks for any help.
3.8 N/A Series II
Im new to the forum and need some help getting started. Im going from a Accord to a Bonnie and need some basic info. I was wondering what type of engine and tranny do we have. Like in the Accord it was a 3.0 but the series was J30A1. Also are there any known parts that can be swapped from any other GM 3.8 or websites. Thanks for any help.
10-23-2002, 10:16 PM
#2
Junior Member
Join Date: May 2002
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Welcome to the forum. :P
If you click on the "Tech Info" link at the top of the page you can see a lot of the specs that your car will have. Willwren is currently working on it but it is comming along great so far.
As far as swapping parts, you might want to check out the grand prix sites like http://www.grandprix.net and http://www.clubgp.com. Not every part is interchangeable but they do have the same engine as your car.
We also have a couple guys on here that are getting some performance shops going online. http://www.angryducktofuracing.com and http://www.domesticperformance.com will have some more that you may like.
If you don't see what you want or don't know if it will work, just ask. Someone here has either done it or knows how to do.
If you click on the "Tech Info" link at the top of the page you can see a lot of the specs that your car will have. Willwren is currently working on it but it is comming along great so far.
As far as swapping parts, you might want to check out the grand prix sites like http://www.grandprix.net and http://www.clubgp.com. Not every part is interchangeable but they do have the same engine as your car.
We also have a couple guys on here that are getting some performance shops going online. http://www.angryducktofuracing.com and http://www.domesticperformance.com will have some more that you may like.
If you don't see what you want or don't know if it will work, just ask. Someone here has either done it or knows how to do.
10-23-2002, 10:33 PM
#3
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Oct 2002
Location: N.W. Indiana
Posts: 1,206
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for your help. This forum is setup differently than the forum I used to so itll take me a small amount of time to get used to everything. But thanks again for everything.
10-24-2002, 08:07 PM
#4
Senior Member
Posts like a Northstar
Join Date: Sep 2002
Location: Lansdale, pa
Posts: 762
Likes: 0
Received 0 Likes
on
0 Posts
10-24-2002, 09:58 PM
#5
Senior Member
Posts like a 4 Banger
Join Date: Oct 2002
Location: Siler City N.C.
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Welcome. You must feel like your swimming. An accord to a Bonnie!!!!!! You've come to the right place. I've learned more at this site than all the others combined. Scroll thru each of the forums here and you'll find where someone has already asked the question. From what plugs to run to how to interpret shoot codes Good luck and enjoy. :lol:
Thread
Thread Starter
Forum
Replies
Last Post