replaced ac pump, a left over part!
#1
Junior Member
Thread Starter
Join Date: Dec 2012
Location: No. California
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
replaced ac pump, a left over part!
I replaced the ac pump with a re manufactured unit. I checked and double checked the replacement part to make sure it would fit before ordering it. They assured me it would be just fine.
The old pump had a high pressure switch in the back of a/c pump. The new one didn't. It mounted up fine, all other wires were fine. Question, if that switch isn't mounted into a/c pump how will I have to jump wires to fool the system so everything will work?
The old pump had a high pressure switch in the back of a/c pump. The new one didn't. It mounted up fine, all other wires were fine. Question, if that switch isn't mounted into a/c pump how will I have to jump wires to fool the system so everything will work?
#2
Senior Member
You don't, you need to take a pair of snap ring players and remove the C clip that holds the pressure switch in the old pump out and install the switch onto the new pump. The new pump should have a metal plug held in with a C clip and a O ring seals it. If the new pump doesn't have provisions for the high pressure switch you need to take it back and get the correct pump.
Thread
Thread Starter
Forum
Replies
Last Post
cjpenny89
1992-1999
3
09-13-2006 11:15 AM
SSsuperchargedEi
Lounge
7
05-25-2005 11:49 PM