UIM Replacement
#1
UIM Replacement
Need to replace LIM gaskets due to oil leaks. Also have had to add coolant a few times
over the past year. Need to know whats the best UIM to use & what all gasket that I
might need that don't come with gasket set.
Thanks in advance
98 Bonniville SLE
over the past year. Need to know whats the best UIM to use & what all gasket that I
might need that don't come with gasket set.
Thanks in advance
98 Bonniville SLE
#2
DINOSAURUS BOOSTUS
Expert Gearhead
The standard run should be the below. Injector o rings, thermostat and valve cover gaskets are usually optional. The best kit at the moment appears to be the APN which is sleeved with reduced diameter stovepipes.
*
Part # ............Name.................................. ...............Rockauto
Fel Pro
ES70599...........Fuel Injector O-rings (need 3)....................$1.91
VS50080R.........Valve Covers (L36) w/o grommets...............$9.38
ES72833...........Valve Cover grommets..............................$7.26
61093..............Throttle Body gasket (L36)........................$3.72
35595..............Thermostat Housing gasket........................$1.00
35666..............Thermostat Seal (rubber)...........................$1.87
Dorman
47065..............Coolant elbow.........................................$3.0 0
GM Dealer/Intense
......................Lower intake gaskets.............................. ~$50
......................GM Pipe Sealant with PTFE...................... ~$10
*
Part # ............Name.................................. ...............Rockauto
Fel Pro
ES70599...........Fuel Injector O-rings (need 3)....................$1.91
VS50080R.........Valve Covers (L36) w/o grommets...............$9.38
ES72833...........Valve Cover grommets..............................$7.26
61093..............Throttle Body gasket (L36)........................$3.72
35595..............Thermostat Housing gasket........................$1.00
35666..............Thermostat Seal (rubber)...........................$1.87
Dorman
47065..............Coolant elbow.........................................$3.0 0
GM Dealer/Intense
......................Lower intake gaskets.............................. ~$50
......................GM Pipe Sealant with PTFE...................... ~$10
Thread
Thread Starter
Forum
Replies
Last Post
Paul1981
2000-2005
10
12-21-2007 10:05 PM