Oil Pressure
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2006
Location: In the mitten
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Oil Pressure
Ok guys, since I have had the car I have done plugs, wires, coils, air filter, fuel filter, and oil change (tonight the HB goes on) I noticed in my traveling last night that my oil pressure gauge is moving a little which I know is normal, the only thing is that it always stays at 120 psi or more, ALWAYS! I don't like this and i have a feeling that it isn't supposed to do that, what is the problem? I did put the correct amount of oil in........
#2
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
ummm didnt you just have a post about a oil pressure sender???? i dunno....anyway when the sender fails it goes to the max reading....sounds like the sender or the gague in the cluster(which is unlikely) is bad
#3
DINOSAURUS BOOSTUS
Expert Gearhead
Sender time...
Easiest way to access and change is while you have the passenger tire off for the HB.. pull both splash shields (front for HB..rear for sender) and it'll be sitting right there on the rear of the motor sticking out of the oil filter adapter.
#4
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2006
Location: In the mitten
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1993 SLE
ummm didnt you just have a post about a oil pressure sender???? i dunno....anyway when the sender fails it goes to the max reading....sounds like the sender or the gague in the cluster(which is unlikely) is bad
If it is the sender, will the gauge still move somewhat? Becasue it sits at like 120 and it will move a little farther when you give it gas? How much? Can i get any brand or do i have to hit the dealer?
#5
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2006
Location: In the mitten
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
Sender time...
Easiest way to access and change is while you have the passenger tire off for the HB.. pull both splash shields (front for HB..rear for sender) and it'll be sitting right there on the rear of the motor sticking out of the oil filter adapter.
#7
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2006
Location: In the mitten
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
Any will work..
Dealer if you want.. personally when I thought I needed one...I hit up the local Advance ...they had it in stock.
Dealer if you want.. personally when I thought I needed one...I hit up the local Advance ...they had it in stock.
#9
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Apr 2006
Location: In the mitten
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
Bout $15 IIRC
#10
DINOSAURUS BOOSTUS
Expert Gearhead
If I Recall Correctly
You unhook the connector for the wires.. unscrew the sensor out of the oil filter adapter (pliers work wonders) and thread the new one in via fingers..tighten with pliers.
You unhook the connector for the wires.. unscrew the sensor out of the oil filter adapter (pliers work wonders) and thread the new one in via fingers..tighten with pliers.