Another Ignition Question
01-16-2004, 04:28 PM
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jun 2003
Location: Upland, Indiana
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Another Ignition Question
Once again I was looking through my JEGS catalog and found more stuff that I want. Which plugs should I get? Also which should I get 8 mm or 8.5 mm plug wires? I'm just looking aroung right now, but I plan on getting all of this in the future.
01-16-2004, 04:41 PM
#2
Member
Posts like a V-Tak
Join Date: Jan 2004
Location: Shelton, CT
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
dude go with the msd superconductor 8.5 mm wires.. they go good with the coils.
as for the plugs if your supercharged and have mods go with the autolite 103'*
supercharged with not so many mods autolite 104'*
or another great plug is the irridium plugs ngk tr55ix is the part number, if you have connections theyre about 6 to 7 bucks a plug
as for the plugs if your supercharged and have mods go with the autolite 103'*
supercharged with not so many mods autolite 104'*
or another great plug is the irridium plugs ngk tr55ix is the part number, if you have connections theyre about 6 to 7 bucks a plug
01-17-2004, 12:48 PM
#5
Junior Member
Posts like a Ricer Type-R
Either the MSD 8.5'* or the Taylor 8'*. The Taylors come in any color you'd want, including read.
Taylor and MSD wires are widely regarded to be equal in performance. The 8'* may be a little easier to fit into the front retainer, but the 8.5'* will squeeze, too.
Taylor and MSD wires are widely regarded to be equal in performance. The 8'* may be a little easier to fit into the front retainer, but the 8.5'* will squeeze, too.
01-17-2004, 11:44 PM
#7
Senior Member
Certified Car Nut
Thread
Thread Starter
Forum
Replies
Last Post
