Master Cylinder Install
01-11-2005, 05:54 PM
#1
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Jul 2004
Location: Manassas, Virginia NOVA
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
Master Cylinder Install
Is it easy? Mines leaking. Would it also be ok to get a remanufactured one from Napa cause a new one is pretty pricey?
01-11-2005, 06:28 PM
#2
It'* not a tough job to actually swapping it out. The work is before and after the job...
Make sure to bench bleed the master cylinder before you mount it in the car. There'* most likely a procedure included in the literature that comes with it.
Then, after it'* mounted, bleed each wheel...starting with the wheel furthest from the master cylinder first.
Make sure to bench bleed the master cylinder before you mount it in the car. There'* most likely a procedure included in the literature that comes with it.
Then, after it'* mounted, bleed each wheel...starting with the wheel furthest from the master cylinder first.
Thread
Thread Starter
Forum
Replies
Last Post
