had my ABS scanned....
11-07-2005, 04:41 PM
#1
Executed
Thread Starter
Join Date: Dec 2002
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
had my ABS scanned....
these are the codes:
A011
A021
A031
A045
A046
A071
they said they tried to clear them, but they would not clear. they think its the EBCM... any ideas?
A011
A021
A031
A045
A046
A071
they said they tried to clear them, but they would not clear. they think its the EBCM... any ideas?
11-07-2005, 05:33 PM
#2
DINOSAURUS BOOSTUS
Expert Gearhead
Nearly every mechanic I've talked to including my buddy says it'* probably a ECM when they scan. It'* the easiest thing and I bet there were many honest failures.
Those codes (I didn't look them up) probably represent 1 ground being sensed by the ECM
Those codes (I didn't look them up) probably represent 1 ground being sensed by the ECM
11-07-2005, 05:43 PM
#4
Senior Member
True Car Nut
Join Date: Aug 2005
Posts: 5,798
Likes: 0
Received 0 Likes
on
0 Posts
when i got my car i had it scaned (i seam to reconize some of your codes from my scan) and they also could not ne cleared...what i did was whent around under the car and cleaned all the WSS conections (and sauldered a broken WSS wire). doing this seamed to fix the problem with my abs...(works fine now beleave me 
)
)
11-08-2005, 10:14 AM
#7
DINOSAURUS BOOSTUS
Expert Gearhead
Originally Posted by shortstuf212559
oooooooh WillWren? you've gotta know 'bout this......
11-08-2005, 10:17 AM
#9
Executed
Thread Starter
Join Date: Dec 2002
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
according to the codes, every single wheel sensor is dead, the EBCM has a internal problem, the Input/Output valves have failed. and my chiltons doesnt say was A011 is...
11-08-2005, 10:22 AM
#10
DINOSAURUS BOOSTUS
Expert Gearhead
Originally Posted by shortstuf212559
MmmmHmmmm checked every connection,. and cleaned the connectors
Originally Posted by BillBoost37
Originally Posted by shortstuf212559
oooooooh WillWren? you've gotta know 'bout this......