Center console arm rest replacements? -96se
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2003
Location: East Lansing, MI
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Center console arm rest replacements? -96se
When I got my 96 se green bonneville, the center console flip cover/cup holder were gone (along with the metal hinge) so essentially there is just a hole in between the front two seats in place of the arm rest/console. I'd love to get this back and certainly will need to when the time comes to sell the car. Any suggestions on where to get one and how to install it? :?
P.*. - I saw this post: http://www.bonnevilleclub.com/forum/...light=arm+rest
I need the green one complete with hinges!!
P.*. - I saw this post: http://www.bonnevilleclub.com/forum/...light=arm+rest
I need the green one complete with hinges!!
#2
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
there are 2 pieces that you need....the bezel (plastic with the lid and the cupholder) and then the lid (matched to your color interior)
the guys that have the Books will jump in with the PN'*......
Billboost might have the lid matched to your color.....post up your color interior here so we know....
the guys that have the Books will jump in with the PN'*......
Billboost might have the lid matched to your color.....post up your color interior here so we know....
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2003
Location: East Lansing, MI
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
The color is the green lid (shown in the middle of the 3) in billboost'* post. I'd love to get this replaced it'* been plaguing me for years!
#4
DINOSAURUS BOOSTUS
Expert Gearhead
PM received.
I have the actual lid only. Typically the latches are broken off the bottom of them. That is a seperate piece that I do not have.
I have the actual lid only. Typically the latches are broken off the bottom of them. That is a seperate piece that I do not have.
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2003
Location: East Lansing, MI
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1993 SLE
there are 2 pieces that you need....the bezel (plastic with the lid and the cupholder) and then the lid (matched to your color interior)
the guys that have the Books will jump in with the PN'*......
Billboost might have the lid matched to your color.....post up your color interior here so we know....
the guys that have the Books will jump in with the PN'*......
Billboost might have the lid matched to your color.....post up your color interior here so we know....
http://www.lansingfx.com/hinge.jpg
Assuming this is the hinge that allows the lid to flip up, I do need it.
#6
DINOSAURUS BOOSTUS
Expert Gearhead
At the moment..I have the top piece only of diagram 2. That hinge is possible, but you would need to swap over your lower cover w/catch onto the cover I have.
Thread
Thread Starter
Forum
Replies
Last Post