Scraping sound after replacing brakes and rotors
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Oct 2007
Location: Arlington, VA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Scraping sound after replacing brakes and rotors
I just replaced the front brake pads and rotors on my 96 Bonneville SE. Now when I'm driving, there'* a scraping sound. Not when I brake, but when I'm stepping on the gas. Is this the brake pad having contact with the rotor, and if so, how do I go about fixing it. Thank you.
#2
Member
Posts like a V-Tak
Thread Starter
Join Date: Oct 2007
Location: Arlington, VA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
I checked the brake line, and it'* out of the way. Driving in reverse slowly, there'* a clicking sound. Rather audible. Driving forward, there'* also a sound, but it'* much less audible.
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Oct 2007
Location: Arlington, VA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
I found out what it was. My hub caps are being held on by zip ties, and with the caliper being spread out further due to a thicker rotor and thicker pads, the zip tie was hitting the caliper.
Thread
Thread Starter
Forum
Replies
Last Post