97 SSEI water pump change
#1
97 SSEI water pump change
I have been reading about how to change the water pump.
I have all the bolts loose and out EXCEPT the one directly behinde the power stering pump,Is the only way to get this last bolt out to take off the power stering pump?
Thanks guys
I have all the bolts loose and out EXCEPT the one directly behinde the power stering pump,Is the only way to get this last bolt out to take off the power stering pump?
Thanks guys
#3
DINOSAURUS BOOSTUS
Expert Gearhead
I tried, the only way was to unbolt the ps pump. Two 13mm bolts through the holes of the pulley at 12 and 6 on the clock. When you get it loose, lower it gently. The oil pressure sender is right below it. You don't want to drop the pump and break the sender.
#4
ok well i have it all back together and it works awesome!!!
that was a big job motor mount had to come off as well.
Now when I start the car I have no oil pressure in the car on the gauge
that was a big job motor mount had to come off as well.
Now when I start the car I have no oil pressure in the car on the gauge
Thread
Thread Starter
Forum
Replies
Last Post
cjpenny89
1992-1999
3
09-13-2006 11:15 AM