New o2 Sensor and...
#1
Senior Member
Posts like a Northstar
Thread Starter
New o2 Sensor and...
I put a new Denso o2 sensor in today, the old one came out easy, seems like the denso has much more flow in/out of the sensor, I've read good things. Anyways, it'* in and I notice the car is kinda sluggish now compared to before. Yes, I did unplug the battery for a few minutes and it'* only gone about 1 mile. Is this normal?
#4
Senior Member
Posts like a Northstar
Thread Starter
The one plug wire for the far driver'* side rear of the motor plug gets within about an inch of the top of the oxygen sensor itself, but it did that before. Wires are brand new, obviously along with oxygen sensor. Only thing that was changed here was oxygen sensor and disconnect/reconnect of the battery. Just want to make sure d/c the battery and changing the sensor could do this? How long does the car usually take to re-calibrate or whatever it has to do? The sensor I pulled out was very clogged-up looking and as I noted before, the new Denso has many more holes and quite a lot more air-flow.
#5
DINOSAURUS BOOSTUS
Expert Gearhead
The wires sound good.
Let'* figure this is the battery unplug. Say about 100 miles and it should relearn the "Michael stole me" form of running.
Let'* figure this is the battery unplug. Say about 100 miles and it should relearn the "Michael stole me" form of running.
#6
Senior Member
Posts like a Northstar
Thread Starter
Yeah forgot to post up, it relearned already in about 30 Now I still have that hesitation issue at start that I think Bill you posted on before cause I had a posting about it, I have to clean the MAF or something, what was it again? and how?
#7
Senior Member
Certified GM nut
batt
Have the same issue. I unhooked my batt to install a higher amp alt and the the car hesitated at first. Its been 100 mile and my mpg is stil not up to speed.
It could take 100 - 200 for the pcm to re-learn.
It could take 100 - 200 for the pcm to re-learn.
#8
DINOSAURUS BOOSTUS
Expert Gearhead
Micael...if you remember posting on it before..I'm going to send you to search for that while I go help someone that just posted a new problem..