need serp. belt size**job done**
03-21-2008, 12:02 AM
#1
need serp. belt size**job done**
for my 96 SSEi
putting on a 3.5" on the SC
and putting on a **EDIT** 3.5" idler to take up the slack
I'm using GY 'Gatorback'
Thanks...Todd
putting on a 3.5" on the SC
and putting on a **EDIT** 3.5" idler to take up the slack
I'm using GY 'Gatorback'
Thanks...Todd
03-21-2008, 07:05 AM
#3
Originally Posted by harofreak00
so, uh.. which belt do you want? the Supercharger belt or the serpentine belt?
A 3.8" idler is HUGE, stock is 3.0" and the oversized that INTENSE sells is 3.5"
A 3.8" idler is HUGE, stock is 3.0" and the oversized that INTENSE sells is 3.5"
T
03-21-2008, 05:38 PM
#6
Originally Posted by harofreak00
90 millimeters = 3.54330709 inches
3.5", just like I said
you can use a stock sized belt if you have that 3.5 idler.
3.5", just like I said
you can use a stock sized belt if you have that 3.5 idler.
Thanks,,,,Todd
03-22-2008, 01:51 PM
#7
This is what I bought for future reference for everyone:
Supercharger belt: GY Gatorback part# 4060725 @ $21.99
The Accessory belt: GY Gatorback part# 4060940 @ $33.99
hope this helps
but remember this is for a 3.5 MPS upgrade using the 3.5 idler pulley size
Todd
Supercharger belt: GY Gatorback part# 4060725 @ $21.99
The Accessory belt: GY Gatorback part# 4060940 @ $33.99
hope this helps
but remember this is for a 3.5 MPS upgrade using the 3.5 idler pulley size
Todd
03-22-2008, 01:54 PM
#8
Junior Member
Posts like a Ricer Type-R
Most go to a 715 belt and a stock idler pulley for the SC when running a 3.4". That would probably be ok on a 3.5" as well, but the tension would be on the tight side.
03-22-2008, 01:57 PM
#9
Originally Posted by willwren
Most go to a 715 belt and a stock idler pulley for the SC when running a 3.4". That would probably be ok on a 3.5" as well, but the tension would be on the tight side.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post