1992-1999 Series I L27 (1992-1994 SE,SLE, SSE) & Series II L36 (1995-1999 SE, SSE, SLE) and common problems for the Series I and II L67 (all supercharged models 92-99) Including Olds 88's, Olds LSS's and Buick Lesabres Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

What can cause a SSEi to be slow?

Thread Tools
 
Search this Thread
 
Old 05-08-2006, 05:44 PM
  #1  
Senior Member
True Car Nut
Thread Starter
 
Hans's Avatar
 
Join Date: Jul 2004
Location: Twin Falls, Idaho
Posts: 7,545
Likes: 0
Received 1 Like on 1 Post
Hans is on a distinguished road
Default What can cause a SSEi to be slow?

I have replaced the following:

Spark Plugs
Plug Wires
MAF Sensor
O2 Sensor
Replaced fuel filter
K&N Intake
Cleaned the TB
Cleaned EGR Valve
Replaced PCV
Replaced cat with highflow magnaflow
Freshly Rebuilt Supercharger


However as you can see from the video my car is still slow, we are talking at least 9 seconds to get to 60.

http://cal48.com/mycarisslow.wmv
(right click save as, 6 megs)

LOOK how slow it is from 50-60, pretty sad.

Therefore I am trying to compile a list of what can be holding the car back without having a scantool.

The car runs perfect at idle, however the performance is still not quite normal.


- Exhuast Manifolds are cracked
- Failing Fuel Pump or FPR
- Vaccum Leaks
Old 05-08-2006, 05:46 PM
  #2  
Senior Member
Certified GM nut
 
Mortehl's Avatar
 
Join Date: Sep 2005
Location: Home Sweet Home in New York
Posts: 2,009
Likes: 0
Received 0 Likes on 0 Posts
Mortehl is on a distinguished road
Default

Hans, when I was having the same kinda problem (good idle, but **** poor performance), it turned out to be the TPS. Not something you can test without a scantool, but its something to consider.
Old 05-08-2006, 05:47 PM
  #3  
Senior Member
True Car Nut
Thread Starter
 
Hans's Avatar
 
Join Date: Jul 2004
Location: Twin Falls, Idaho
Posts: 7,545
Likes: 0
Received 1 Like on 1 Post
Hans is on a distinguished road
Default

Originally Posted by Mortehl
Hans, when I was having the same kinda problem (good idle, but **** poor performance), it turned out to be the TPS. Not something you can test without a scantool, but its something to consider.
It has been tested with my DMM, it shows correct voltage at idle and simulated WOT, there appear to be no "dead" spots either that I can tell. I will replace that soon enough though.
Old 05-08-2006, 05:48 PM
  #4  
Senior Member
Certified GM nut
 
Mortehl's Avatar
 
Join Date: Sep 2005
Location: Home Sweet Home in New York
Posts: 2,009
Likes: 0
Received 0 Likes on 0 Posts
Mortehl is on a distinguished road
Default

Originally Posted by Hans
Originally Posted by Mortehl
Hans, when I was having the same kinda problem (good idle, but **** poor performance), it turned out to be the TPS. Not something you can test without a scantool, but its something to consider.
It has been tested with my DMM, it shows correct voltage at idle and simulated WOT
Okie dokie. I just wanted to toss it out there.
Old 05-08-2006, 07:50 PM
  #5  
Senior Member
Posts like a Camaro
 
daman's Avatar
 
Join Date: Sep 2003
Location: Bad Axe,MI.
Posts: 1,025
Likes: 0
Received 2 Likes on 2 Posts
daman is on a distinguished road
Default

Getting any belt slippage on the super?????
Old 05-08-2006, 09:08 PM
  #6  
Junior Member
 
vital49's Avatar
 
Join Date: Mar 2003
Location: Purgatory
Posts: 1
Likes: 0
Received 2 Likes on 2 Posts
vital49 is on a distinguished road
Default

Dead link. Page cannot be displayed.
Old 05-08-2006, 09:12 PM
  #7  
PopaDopaDo
True Car Nut
 
popatim's Avatar
 
Join Date: Jan 2005
Location: NY
Posts: 4,957
Likes: 0
Received 1 Like on 1 Post
popatim is on a distinguished road
Default

Back when I had a Capri, I had bracket on the throttle cable break in such a way that floored wasn't WOT at the TB. The bracket looked fine at Idle. That was tuff for one person to figure out, but I got it.
Old 05-08-2006, 09:13 PM
  #8  
Senior Member
True Car Nut
Thread Starter
 
Hans's Avatar
 
Join Date: Jul 2004
Location: Twin Falls, Idaho
Posts: 7,545
Likes: 0
Received 1 Like on 1 Post
Hans is on a distinguished road
Default

Originally Posted by vital49
Dead link. Page cannot be displayed.
Link Fixed.....


daman - I just replaced both belts with gatorbacks so I dont think that is the cause but could be..I am getting good boost though, probably around 8 or 9lbs. This is with the stock 2.5" pulley.

I am wondering perhaps if I have a bad fuel injector or 2.

My resistances on the coil packs are pretty close as well.
Old 05-08-2006, 09:21 PM
  #9  
Senior Member
Posts like a Northstar
 
Jason1351's Avatar
 
Join Date: Jul 2005
Location: Detroit, MI
Posts: 649
Likes: 0
Received 0 Likes on 0 Posts
Jason1351 is on a distinguished road
Default

Also gotta figure in mileage and age. She might just be tired.
Old 05-08-2006, 09:41 PM
  #10  
Junior Member
 
Bonneville92V688's Avatar
 
Join Date: Apr 2006
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Bonneville92V688 is on a distinguished road
Default

Wow, I guess that is pretty sluggish. Mine is alot quicker than that, but that'* probably because it'* a 94.


Quick Reply: What can cause a SSEi to be slow?



All times are GMT -4. The time now is 06:59 PM.