Which Scan Tool for a 94 SE
02-03-2004, 09:22 AM
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Nov 2003
Location: Blue Springs, MO
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Which Scan Tool for a 94 SE
OK, I am going nuts trying to figure out my stumbling problem. I want to get a scan tool for my 94 SE. From my understanding, 94-94 were the transition years from OBD-1 toOBD-2. They have an OBD-2 connector but mostly OBD-1 protocols. Question: Will an OBD-2 scan tool work with my car? The OBD-1 tools have the wrong connector. My SES light came on for awhile when I was doing some highway driving last week so I want to find out what is going on. Anyone have any experience with scan tools and the 94-95s?
Thanks
Thanks
02-03-2004, 09:58 AM
#2
Senior Member
Posts like a Turbo
Join Date: Mar 2003
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
Hi I also have a 94 SE your have the obd II connector but your car corresponds with the OBD I codes...so you have to get a scantool like the actron cp9110 which uses the obd I codes and you can get the connector for the OBD II I purchased one off ebay!
02-03-2004, 01:29 PM
#3
Senior Member
True Car Nut
Join Date: Sep 2002
Posts: 3,392
Likes: 0
Received 0 Likes
on
0 Posts
02-03-2004, 03:48 PM
#4
Member
Posts like a V-Tak
Join Date: Nov 2003
Location: Cincinnati Ohio
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
STEVEJ94,
CAN YOU PLEASE EXPLAIN YOUR STUMBLING PROBLEM YOUR HAVING. I HAVE SPORADIC PROBLEM WITH MY 94' AT HIGHWAY SPEEDS THAT FEELS LIKE THE ENGINE IS STUMBLING. IF IT GOES ON LONG ENOUGH IT WILL TURN ON THE SES LIGHT. IF I PULL OVER AND TURN OFF THE IGNITION AND TURN IT BACK ON THE LIGHT STAYS OFF.
BREW
CAN YOU PLEASE EXPLAIN YOUR STUMBLING PROBLEM YOUR HAVING. I HAVE SPORADIC PROBLEM WITH MY 94' AT HIGHWAY SPEEDS THAT FEELS LIKE THE ENGINE IS STUMBLING. IF IT GOES ON LONG ENOUGH IT WILL TURN ON THE SES LIGHT. IF I PULL OVER AND TURN OFF THE IGNITION AND TURN IT BACK ON THE LIGHT STAYS OFF.
BREW
02-03-2004, 06:49 PM
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Nov 2003
Location: Blue Springs, MO
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
scan tool
Thanks neon and fuddyduddy. I think I located one on ebay with the right cables, etc.
Brew,
You can find info ad-nausium regarding my stumbling problems in the topic "low-load miss" in this same discussion forum. To date, I have replaced, plugs, plug wires, coil packs, ICM, O2 sensor and cleaned the throttle body and looked for vacuum leaks (also replaced all upper intake gaskets). Nothing has made much of a difference.
Brew,
You can find info ad-nausium regarding my stumbling problems in the topic "low-load miss" in this same discussion forum. To date, I have replaced, plugs, plug wires, coil packs, ICM, O2 sensor and cleaned the throttle body and looked for vacuum leaks (also replaced all upper intake gaskets). Nothing has made much of a difference.
Thread
Thread Starter
Forum
Replies
Last Post
Andy King
1992-1999
0
11-19-2003 06:38 AM