center console for 60/40 split bench setup
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2003
Location: Detroit
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
center console for 60/40 split bench setup
Hey,
I have a 60/40 front seat and i was wondering if anyone had found an aftermarket center console that would fit well under the dash, i never need the extra seatbut i could really use the storage space of a center console. (also if anyone has built their own a set of plans would be awesome--)
any ideas?
I have a 60/40 front seat and i was wondering if anyone had found an aftermarket center console that would fit well under the dash, i never need the extra seatbut i could really use the storage space of a center console. (also if anyone has built their own a set of plans would be awesome--)
any ideas?
#3
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2003
Location: Detroit
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
I went by my local auto parts mile (murrays, auto zone and pep boys in a square block) and checked out what they had. I bought a console designed to fit in the middle seat and be attached by the seatbelt. This was a GREAT design... would have been perfect, but it was WAY too big for the bonny... so im on a hunt to find something smaller.
The unit was about 60 bux and had two cup holders and a padded hinged compartment that felt extremely sturdy....
anyways... bump for this... maybe someone else has any ideas
The unit was about 60 bux and had two cup holders and a padded hinged compartment that felt extremely sturdy....
anyways... bump for this... maybe someone else has any ideas
#4
Senior Member
Posts like a 4 Banger
Join Date: Nov 2003
Location: St. louis
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
I am definitely interested in this as well. I have a set of leather seats front and back that i got from the junk yard for about 20 bucks. I have put them in because I can't figure out how to wire the power and don't know what to do with that empty space. I was thinking about using the console from my wreaked 92se to model up a fiberglass fabrication, or one of those hot/cold cooler console thingys. Problem with the first idea is I have no idea of how to fiberglass anything and the second seem like they just wont fit.
#5
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2003
Location: Detroit
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
All of the aftermarket consoles of any significant functions seem to be too big to fit a bonneville... let me know if you find anything
Thread
Thread Starter
Forum
Replies
Last Post