need help .ABS Brakes
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jul 2003
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
need help .ABS Brakes
92 ssei w/ traction control. ABS light & traction contol light comes on then goes out but will stay on quite awhile. also brake peddle pulsates . any information on possible cause would be greatly appreciated
#2
Senior Member
True Car Nut
Join Date: Aug 2003
Location: Salina, KS
Posts: 5,246
Likes: 0
Received 0 Likes
on
0 Posts
Here you go:
http://www.bonnevilleclub.com/forum/...t=abs+traction
Check that. Then we can go from there.
http://www.bonnevilleclub.com/forum/...t=abs+traction
Check that. Then we can go from there.
#4
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jul 2003
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
help, abs light & traction control light
thanks , i put a small sunpro code scanner on and nothing showed . looks like i'll have to take to dealership :( to read code $70.00. if i bleed the front brakes it goes out for a few miniutes. sure sounds like sensor in hub. checked on price of new hub w/bearing $130.00 but is sensor built in? is there anyway of checking sensor w/ ohm meter? i know where there is a wrecked 92 but not sure if worth the try to to replace w/ used part. tried to find good mechanics book on ABS but nothing around.
#6
Yes, actually the sensor is part of the front wheel bearing. I'll have to check the ohm-redings, I'm not sure. Easiest way is to pay $70 for the diagnostic and see what the codes and problem are.
#8
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jul 2003
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
i just fixed my sons 92 ssei though his abs light was coming on & off & brake peddle would pulsate sometimes. had to change front hub,sensore is built in,checked w/ ohm meter , no resitance. Also had to change caliper, was sticking sometimes . good luck
Thread
Thread Starter
Forum
Replies
Last Post
bighank
Buick
22
05-01-2023 12:39 AM