Need GM part numbers for FE2 sways & springs
#1
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Nov 2002
Posts: 857
Likes: 0
Received 0 Likes
on
0 Posts
Need GM part numbers for FE2 sways & springs
Does anyone have the GM part numbers for the FE2 front and rear swaybars and the springs? I figure I might as well check with GMPartsDirect, since I've been trying to get them used for maybe a year, with no luck.
TIA
-Mark
TIA
-Mark
#2
Senior Member
True Car Nut
Re: Need GM part numbers for FE2 sways & springs
Originally Posted by Bugsi
Does anyone have the GM part numbers for the FE2 front and rear swaybars and the springs? I figure I might as well check with GMPartsDirect, since I've been trying to get them used for maybe a year, with no luck.
TIA
-Mark
TIA
-Mark
buying from the dealer will be a complete ripoff.
#3
Junior Member
Posts like a Ricer Type-R
Front FE2 bar:
14081409
Endlinks 25679063 (order 2 or go with energy suspension)
Center frame mount brackets 14086860 you need TWO, and yours won't work
Center frame mount bushings 14086877 you need TWO, and yours won't work
Front FE2 springs:
Listed as 22076866 ONLY, but says 'order by application'. This is because FE2 has about 5 different close diameters and you need a matched set.
Rear FE2 bar:
255559836, and you know the drill for the endlinks (generic kit from energy suspension)
the inner links are also listed as 'order by application'. I'm not sure why, as there should be two distinct sizes.
Rear springs:
Listed again as 'order by application'. The RPO code for "Computer Selected Suspension" means that your springs were computer matched by load rating and spring rate as a matched set of 4 for the best ride and performance.
I suggest you email GMPD about this.
14081409
Endlinks 25679063 (order 2 or go with energy suspension)
Center frame mount brackets 14086860 you need TWO, and yours won't work
Center frame mount bushings 14086877 you need TWO, and yours won't work
Front FE2 springs:
Listed as 22076866 ONLY, but says 'order by application'. This is because FE2 has about 5 different close diameters and you need a matched set.
Rear FE2 bar:
255559836, and you know the drill for the endlinks (generic kit from energy suspension)
the inner links are also listed as 'order by application'. I'm not sure why, as there should be two distinct sizes.
Rear springs:
Listed again as 'order by application'. The RPO code for "Computer Selected Suspension" means that your springs were computer matched by load rating and spring rate as a matched set of 4 for the best ride and performance.
I suggest you email GMPD about this.
#4
Senior Member
True Car Nut
Join Date: Dec 2002
Location: Sauk Centre, MN
Posts: 5,459
Likes: 0
Received 0 Likes
on
0 Posts
I have a set of F41 springs and a rear FE2 sway bar. F41 was the RPO code for the Computer Command Ride used from 1994-1999 and I believe it utilized FE2 sway bars and springs.
I am willing to sell the springs and FE2 but the pain of shipping the sway bar is more than I have time for -the springs are already in boxes (have to remove the fronts from the struts yet, but that could be done this week).
If you want I'll sell the springs for $110 shipped to your door.
I would suggest finding a SSE or SSEi in a yard near you with the sways.
I am willing to sell the springs and FE2 but the pain of shipping the sway bar is more than I have time for -the springs are already in boxes (have to remove the fronts from the struts yet, but that could be done this week).
If you want I'll sell the springs for $110 shipped to your door.
I would suggest finding a SSE or SSEi in a yard near you with the sways.
#5
Guest
Posts: n/a
F41 is Firm Ride .... Most cars with CCR have FE2... The sways for the FE2 and F41 are the same..
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#6
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Nov 2002
Posts: 857
Likes: 0
Received 0 Likes
on
0 Posts
Ol BlueEyesBonnie, I PM'd you but didn't hear back from you.
I want your F41 springs AND that rear swaybar. Let'* find a way to make it happen!
Get back to me!
-Mark
I want your F41 springs AND that rear swaybar. Let'* find a way to make it happen!
Get back to me!
-Mark
Thread
Thread Starter
Forum
Replies
Last Post
Downeasta
Performance, Brainstorming & Tuning
6
02-02-2011 07:38 AM
Bugsi
Performance, Brainstorming & Tuning
7
11-20-2005 08:16 PM