water pump chg. ? on 98 Bonnie do you have to remove mtr mnt
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Dec 2004
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
water pump chg. ? on 98 Bonnie do you have to remove mtr mnt
Ok on my 92 Lesabre I had to remove the mtr mount to chg the water pump but on my 99 Park and 98 Bonnie it sure looks like you can get ALL the bolts after you take off the pulley so can this be done w/o removing the mtr mount ?
#2
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Dec 2004
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
did a search and it said no need to remove mount but 2 bolts on ps pump have to come out, It doesn't look like the pump would be in the way at all?? Well I don't need a chg now anyway just being anal and prepared !
#3
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Dec 2004
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
good news, I looked at the Bonnie again today 1998, and you do have to remove the 2 PS pump bolts to move the PS pump to get at that one WP bolt but the mtr mount is ok where it is, But...when I looked at the 1999 Park Ave the PS pump is back much further so no mtr mount or PS in the way at alll, just remove the wp pulley,belt and the WP . Looks like someone finnaly got smarter, also they decided to put a nice fuel pump access panel in the trunk so no more dropping the tank and the tanks are plastic so no rust !
Thread
Thread Starter
Forum
Replies
Last Post
cjpenny89
1992-1999
3
09-13-2006 11:15 AM