I'm new here
#1
I'm new here
Hello, I just wanted to say hello since I am new here. I was lurking last week and reading some good information on the Serpentine Belt. I havent attempted it yet and was slightly alarmed that it involves removing the right motor mount. Anyhow, I am looking to replace my windshield on my 99 Pontiac Bonnevile, does anybody know if any other years or makes of car are compatible with it? Thank you.
#2
I'll be the first to say this.
Please put your year and trim level into your signature (you change it in your proflie). That way we all have the needed information regarding your vehicle and parts interchangeability.
*edit* Oh, and welcome to the board!
Please put your year and trim level into your signature (you change it in your proflie). That way we all have the needed information regarding your vehicle and parts interchangeability.
*edit* Oh, and welcome to the board!
#4
Senior Member
True Car Nut
Join Date: May 2005
Location: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Posts: 3,448
Likes: 0
Received 6 Likes
on
6 Posts
Welcome to BC. As far as the belt, you don't have to remove the whole motor mount itself....only the sleeve between the mount and the motor.
On the windshield, not sure about other makes or models fitting a Bonneville although many other H-bodies do look like they might. If your Bonne has a HUD (Heads Up Display), then the windshield has a unique design to reflect the digital read-outs.
On the windshield, not sure about other makes or models fitting a Bonneville although many other H-bodies do look like they might. If your Bonne has a HUD (Heads Up Display), then the windshield has a unique design to reflect the digital read-outs.
#5
Senior Member
Certified GM nut
Join Date: Jul 2004
Location: West Point, Utah - Village Idiot
Posts: 1,606
Likes: 0
Received 2 Likes
on
2 Posts
Re: I'm new here
Originally Posted by bill1971
...I havent attempted it yet and was slightly alarmed that it involves removing the right motor mount. Anyhow, I am looking to replace my windshield on my 99 Pontiac Bonnevile, does anybody know if any other years or makes of car are compatible with it? Thank you.
I suspect the 99 is the same...
As for your windsheild, have the pros do it and have them install the correct glass. You really don't want leaks around the windshield.
#6
Senior Member
True Car Nut
Join Date: May 2005
Location: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Posts: 3,448
Likes: 0
Received 6 Likes
on
6 Posts
Re: I'm new here
Originally Posted by SSE Motorhead
Remove the motor mount to change the serpentine belt? If that'* the case on the '99, I'd sell it and buy a '93...you don't have to remove motor mounts to change the belt on the '93.
I suspect the 99 is the same...
I suspect the 99 is the same...
Thread
Thread Starter
Forum
Replies
Last Post
chambiec1
Introductions for new members
20
08-29-2007 09:34 PM
Bonneville92V688
Lounge
47
08-24-2007 05:09 PM