Pulling motor!! What is the best way to do it??
#1
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2006
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Pulling motor!! What is the best way to do it??
Hi guys i have to put a new motor in a 1996 Bonneville SE, trans is still good.
Is it easier to pull the trans and motor as one? Or just pull the motor and leave the trans in the car? Any tricks i would love to hear!! Can i do it with out pulling the Rad.?
Thank you Matt
Is it easier to pull the trans and motor as one? Or just pull the motor and leave the trans in the car? Any tricks i would love to hear!! Can i do it with out pulling the Rad.?
Thank you Matt
#3
Guest
Posts: n/a
Originally Posted by skydog
The old motor (70,000miles) starting missing real bad, pulled plugs two cyl FULL of oil!!
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#6
Guest
Posts: n/a
Originally Posted by skydog
Can a leaking intake put oil in the cyl?
If you are going to replace the motor, we ask that you disect the upper and lower intake for issues, as well as a series of pics if you wouldn't mind...
Pics are worth a thousand words here
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#7
Senior Member
True Car Nut
Pulling the rad will be nothing compared to pulling the engine, and yeah it makes it easier to remove the radiator. Pulling the engine with trans is a little more work than just pulling the engine. Techinfo article here:
http://www.bonnevilleclub.com/forum/...e=article&k=84
http://www.bonnevilleclub.com/forum/...e=article&k=84