Brakes
#2
Senior Member
Posts like a Turbo
Join Date: May 2002
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
The First time I did mine a couple years ago, I used AC-Delco Pads and Rotors. Had no problems with them at all, and was very happy (although they are expensive). Just this past spring, I had the pads wore right down to the wear indicators again, but the rotors looked fine. I put Bendix pads on this past time, and have also had no problems. only minor thing I have noticed with the bendix for some reason, is that there is a "squeaking" while its going down the road sometimes. If I put my foot on the brake, or tap the brakes, it stops for a while. I know its brake related because if I stick my head out the window while driving, I can hear the pads touching lightly, etc.. I've ruled out a sticky caliper by going through a few other steps, so I'm just assuming its a characteristic of the pads. Next time around I'll probably replace both the pads and rotors again with Delco'*.
I use Caliper grease on EVERYTHING as well. The bolts, back of the pads, piston, brackets, etc... Always seems to help make things work smoother.
Hope this helps!
I use Caliper grease on EVERYTHING as well. The bolts, back of the pads, piston, brackets, etc... Always seems to help make things work smoother.
Hope this helps!
#4
Senior Member
Posts like a Camaro
I switched out my rotors to Powerslot 10.9" rotors that are meant for the Grand Prix but we use the same size brake and brake system. And I put on Performance Friction Ceramic Pads. Cant go wrong.
#5
Junior Member
Posts like a Ricer Type-R
Join Date: Jan 2002
Location: Terre Haute, IN
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Brakes
Gotta agree with 99bonnevillese, ceramic pads, and pwr slot rotors are awesome! Very little to no brake dust. Worth every penny, and seem to last longer!
#6
Senior Member
Posts like a Turbo
Join Date: May 2002
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
He was also telling me the difference in braking distance and power is pretty impressive as well. I was actually thinking about going with this setup my next time around, but I wanted more people to do it first in the mean time, and provide more feedback! :P
This definetely might be something to consider Jeff, if your looking along the lines of performance braking
This definetely might be something to consider Jeff, if your looking along the lines of performance braking
#8
OK, humor me for a minute because this is probably a stupid question. :?
I got a '95 SSEi and my buddy has a '98 GTP and at just a visual glance the brakes are nothing alike. My pads go on my calipers and my buddies go into a frame like thing and then on the calipers. Am i just missing something or is my car too old to have the same break system as the GTP'*? I would love to upgrade my brakes with some of those GTP aftermarket numbers but I don't think they would even come close to fitting. So were you just using the rotor and standard Bonneville break pads?
And if so, are there any real brake upgrades that I could do to get rid of the stock setup?
Any thought?
PS: Mine also puts out a ton of breakdust. So getting ceramic pads helps?
Originally Posted by 99BonnevilleSE
I switched out my rotors to Powerslot 10.9" rotors that are meant for the Grand Prix but we use the same size brake and brake system.
And if so, are there any real brake upgrades that I could do to get rid of the stock setup?
Any thought?
PS: Mine also puts out a ton of breakdust. So getting ceramic pads helps?
#9
Senior Member
Posts like a Turbo
Join Date: Jan 2002
Location: Torrington, CT
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
I have Bendix semi-metallic pads and shoes in the front and back. The front rotors are el cheapo ones that were only $20 a piece. The back drums are cheap as well, only $25 each. I use Valvoline DOT 4 synthetic because its fairly cheap($5 a quart). I have racked up 15k under harsh conditions (I deliver pizza with the car) and the brakes are holding up well, no rotor warp or anything like that.