Engine codes, please help
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jun 2007
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Engine codes, please help
Hi, I'm new to the forum and just trying to bring my newly accuired 92 SSEi back to a good standing. Car sometimes starts bad, tach guage is constantly moving up and down in idle, car runs rough and even stalled twice on me. I currently waiting for my factory manual which is on its way. I did the scan and have a following codes come up.
**Computer codes
-engine codes
#41 - no camshaft reference signal
#66 - a/c freon low
-history codes
#18 cranc signal open or no signal
#41
#45 L.F. inlet valve circuit
Things I have done on car:
-all fluids and filters
-spark plugs & wires
-cleaned TB & MAF sensors
Where should I start looking? I have on hands: new O2 sensor, new IAC sensor, fuel filter. Going to replace them this weekend
**Computer codes
-engine codes
#41 - no camshaft reference signal
#66 - a/c freon low
-history codes
#18 cranc signal open or no signal
#41
#45 L.F. inlet valve circuit
Things I have done on car:
-all fluids and filters
-spark plugs & wires
-cleaned TB & MAF sensors
Where should I start looking? I have on hands: new O2 sensor, new IAC sensor, fuel filter. Going to replace them this weekend
#2
DINOSAURUS BOOSTUS
Expert Gearhead
It'* time to start looking at the various items. Look at the wiring for the ICM/crank/cam for any rubbing or breaks. Check the connectors and clean any corrosion.
I would say pull the cam sensor and turn the engine to find the cam magnet to ensure it'* there.
I would say pull the cam sensor and turn the engine to find the cam magnet to ensure it'* there.
Thread
Thread Starter
Forum
Replies
Last Post
matt14213
1992-1999
3
07-22-2008 09:13 AM