how to install 180 stat as easily as possible
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Mar 2004
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
how to install 180 stat as easily as possible
just wondering quickest easiest and least messy way to install a 180 stat,?
Yes i have the gasket as well, for our bonnies does it go on top or bottom of stat?
thanks all!
chad
Yes i have the gasket as well, for our bonnies does it go on top or bottom of stat?
thanks all!
chad
#2
Junior Member
Posts like a Ricer Type-R
Chad, you need a fiber (gray) gasket for the housing, AND a rubber ring for the rim of the thermostat.
Remove the housing, stuff a rag in the hole in the lower intake (after removing the old stat), and CAREFULLY clean off the old gasket from the lower intake and water outlet (stat housing).
Reverse.
I'd strongly suggest you buy Chiltons #28200 before doing this. It'* less than $15 bucks at the auto parts store.
Remove the housing, stuff a rag in the hole in the lower intake (after removing the old stat), and CAREFULLY clean off the old gasket from the lower intake and water outlet (stat housing).
Reverse.
I'd strongly suggest you buy Chiltons #28200 before doing this. It'* less than $15 bucks at the auto parts store.
#3
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Mar 2004
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
ok, thank you, so nothing will leak badly when i disconnect everything?
such as coolant anywhere? and what would i call the gray gasket for the upper intake when i got to buy it?
thanks again, any more info i may need would be great but other than that thanks
such as coolant anywhere? and what would i call the gray gasket for the upper intake when i got to buy it?
thanks again, any more info i may need would be great but other than that thanks
#4
Senior Member
True Car Nut
Join Date: Jan 2003
Location: Bloomington-Normal, IL 1997 SE
Posts: 3,734
Likes: 0
Received 0 Likes
on
0 Posts
Make sure you do it with the car cooled off overnight preferably. Otherwise coolant will come up when you pull the t-stat. Ask for a thermostat gasket from the dealer or an autoparts store. You will loose some coolant (less than a cup), so do it on gravel preferably, and have some kitty litter to soak up the stuff you spill. I have never screwed with the bleeder valve, just pour more coolant in when everything is assembled again. Pour slowly and stop when you hear bubbling. You want to get all those bubbles out. Then make sure you have plenty in the overflow tank. Here is a writeup on it.
http://www.pfyc.com/supportfiles/tstat/tstat.htm
hope this helps.
http://www.pfyc.com/supportfiles/tstat/tstat.htm
hope this helps.
#8
Senior Member
Posts like a Corvette
Join Date: Nov 2003
Location: Brunswick, Georgia, USA, North American Continent, Earth, Milky Way Galaxy
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
If I replace the stock 195 thermostat with a 180 degree thermostat from some place like Discount Auto, or NAPA as suggested (Is there a difference? Should I look for a specific kind of thermostat, besides being 180 degree?), is there anything else that should be changed after replacing the thermostat in the way suggested? My dad thought maybe the 'puter would need to be adjusted or something. He'* doing it this weekend while I'm up with my mom in Georgia, so I want to give him the right and complete info Thanks again guys!
#9
Junior Member
Posts like a Ricer Type-R
Nothing else to change or adjust. The 180 will also only help you as long as you have air flowing through the rad. Moving in the car, or with the fans on. City driving, it won't help a bit.