GM Forum - Buick, Cadillac, Olds, GMC & Pontiac chat

GM Forum - Buick, Cadillac, Olds, GMC & Pontiac chat (https://www.gmforum.com/)
-   1992-1999 (https://www.gmforum.com/1992-1999-91/)
-   -   Air Noise (https://www.gmforum.com/1992-1999-91/air-noise-185148/)

Tamara 09-26-2002 11:29 PM

Air Noise
 
I have a lot of air noise in my car lately. I like to contribute it to people slamming the doors and cracking the rubber. Regardless, the rubber is cracked and I am assuming this is where a lot of the noise is coming from. Is there anyway to "fill" the rubber, or to somehow seal it to stop the air from getting in?
Anyone else have this problem, and fix it? if so, how?

willwren 09-26-2002 11:44 PM

Are you talking about the plastic trim that runs around the top of the door openings on both sides, or the rubber weatherstripping itself?

Tamara 09-26-2002 11:54 PM


Originally Posted by willwren
Are you talking about the plastic trim that runs around the top of the door openings on both sides, or the rubber weatherstripping itself?

Both. The weatherstripping is the worse, though.

Teuobk 09-27-2002 12:21 AM

Try some silicone spray lubricant on the weatherstripping. It comes in an aerosol can - just spray it one. If that doesn't help much, new weatherstrip runs about US$40 per door.

willwren 09-27-2002 12:54 AM

Good call on the silicone. That'll help keep your doors from sticking/freezing shut in the winter, too. Yes, we have that problem way down here below you. Changing the weatherstripping on the doors is a fairly easy task, too. You might want to get the part numbers for the leaky door strips from Deathrat, and run 'em through www.gmpartsdirect.com , from my limited experience, they're the cheapest source for genuine GM parts. No overhead, no markup. If you read my last post about my ABS, you know what I mean!

DeathRat 09-27-2002 08:24 AM

Send me your info again & I'll send a list of GM P/N's for the door weatherstrips. :wink: In the mean time, you've got two choices: 1.) attach single sided weatherstrip to the door side. *OR* 2.) "Adjust" the door inwards by using a 2X4 in the opening & closing the door on it in different places, while bending the door itself inwards to where you want more pressure. 8) This "OLD" trick I found out from a body man! :shock:

willwren 09-27-2002 09:42 AM

Or you can substitue Drifter's head for the 2x4. It's a little denser, and won't dent as easily.

Drifter420 09-27-2002 09:50 AM


Originally Posted by willwren
Or you can substitue Drifter's head for the 2x4. It's a little denser, and won't dent as easily.


Ha ha ha.. good thing I was wearing that helmet through the fire... had to be saved for something... or are you talking about my other head.. ha ha ha ... kiddin around...

"Can't we all just get along"... HELL NO !!! IF YOU DRIVE RICE !!! WE'LL MAKE YOU FRIED RICE... :twisted:


All times are GMT -4. The time now is 03:17 PM.


© 2024 MH Sub I, LLC dba Internet Brands