1993 reverse reaction shell chewed up
#1
Junior Member
Thread Starter
Join Date: Mar 2008
Location: JANESVILLE, WISCONSIN
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
1993 reverse reaction shell chewed up
The car drove fine no signs of begining failure has 143,000 miles 1993 3.8 engine non-supercharged. One day driving bang trans goes. I had all drive gears to about 15mph and no reverse. I pulled engine and trans together out. Took trans apart. Found the reverse reaction shell bad and some kind of spacer. I can get the shell for $28.00. I don't know what the spacer is called it is made of plastic about 3" i.d. 4" o.d. One other spacer too is bad i had to break to get shaft out. It is plastic tight around shaft and has a 1/2 inch flange all around it.
Can some one help on the parts
what may have caused this prob.
Is there anything else i should replace while i am in the trans .
Everything else looks good.
I am going to include pics as soon as i learn how.
Can some one help on the parts
what may have caused this prob.
Is there anything else i should replace while i am in the trans .
Everything else looks good.
I am going to include pics as soon as i learn how.
Last edited by STENZEL7; 02-28-2009 at 01:17 PM. Reason: ADD PICS
Thread
Thread Starter
Forum
Replies
Last Post