Anyone know what could cause a blockage like this?
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Jan 2008
Location: Orlando Florida
Posts: 182
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know what could cause a blockage like this?
This blockage was in my LIM water channels..and there was this pitting in the LIM as well..
#3
Senior Member
True Car Nut
Either Dex gone acidic or perhaps someone used an oxalic acid cooling system cleaner and failed to flush it out properly. The pitting on that LIM is so deep, it appears to perforate to the exterior. I have never seen one that bad. You did not re-install that LIM, I hope?
You are aware that the LIM blinds or blocks one coolant passage on each cylinder head, right? It is common for these "dead ends" to get filled up with sludge, but the corrosion that you have is not common at all.
You are aware that the LIM blinds or blocks one coolant passage on each cylinder head, right? It is common for these "dead ends" to get filled up with sludge, but the corrosion that you have is not common at all.
#4
Senior Member
Posts like a Turbo
Join Date: Sep 2007
Location: Saginaw, MI
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by White93z34
one very neglected cooling system!
Thread
Thread Starter
Forum
Replies
Last Post
Hans
Performance, Brainstorming & Tuning
6
11-19-2006 01:50 PM
LilOrphan88
1992-1999
8
11-03-2005 03:17 PM