Where to get gasket for Vac block on top of SC?
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2009
Location: OHIO
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Where to get gasket for Vac block on top of SC?
Where can I get the gasket for the Vac block on top of my SC? I am not sure where to look or what it is called? Thanks for the help
#2
DINOSAURUS BOOSTUS
Expert Gearhead
Your best bet would be to find a dealership parts guy that'* good and have him help you find it in the drawings. It'* likely you are going to find out it'* no longer available and then you are off to make your own.
#3
Senior Member
Posts like a Turbo
Thread Starter
Join Date: May 2009
Location: OHIO
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Hello Bill,
I tried gm gasket maker and it worked for a little while but just didn't hang in very well. How would I go about making my own gasket? Thanks
I tried gm gasket maker and it worked for a little while but just didn't hang in very well. How would I go about making my own gasket? Thanks
#5
Senior Member
True Car Nut
Join Date: Jun 2007
Location: New Lenox, IL
Posts: 2,478
Likes: 0
Received 0 Likes
on
0 Posts
That'* what I did for the jag. You can buy two different kinds at a normal auto shop; one more geared for water pumps and one general purpose. The one for the water pumps I believe is blue, and the other is gray. I used the gray one to make a water pump gasket for the Jag, and it held up beautifully. I wouldn't hesitate to do it again.
Thread
Thread Starter
Forum
Replies
Last Post
trixster68
Forced Induction
3
06-13-2009 07:44 AM