Front Wheel bearings for a '94 bonneville SE
#1
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: May 2009
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Front Wheel bearings for a '94 bonneville SE
Before I attempt my first wheel bearing job are there any tips or tricks that I should be aware of ? I'm hearing the growling noise from the front so I think that is the problem. Is it a good idea to replace in pairs? The replacements are a bit pricey (Timken), so I'm thinking of another brand. $100.00 for 1 Timken versus $57.00 for another brand.
Thanks for your time.
Thanks for your time.
#2
Senior Member
True Car Nut
I replaced both mine at the same time and opted for the Timken'*. It'* a pretty easy job. The hardest part was breaking the hub nut loose, so if you have a good impact wrench, it will make short work of the job.
If you need brakes and rotors. now would be a good time to do the fronts while you have everything tore apart.
If you need brakes and rotors. now would be a good time to do the fronts while you have everything tore apart.
#3
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
This is at Auto Parts Fast at RockAuto
TIMKEN Part # 513087
FWD; 4-Wheel ABS; Brg Flg Mtg Holes Non-Threaded.; Front
$90.99$0.00$90.99
TIMKEN Part # 513087
FWD; 4-Wheel ABS; Brg Flg Mtg Holes Non-Threaded.; Front
$90.99$0.00$90.99
Thread
Thread Starter
Forum
Replies
Last Post
fax
Bonneville GXP/ Northstar Powered Cars
6
10-19-2009 10:25 PM