i got the wrong transmission(it was right after all!!!!!!!!)
#1
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Jul 2004
Location: Diberville Mississippi
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
i got the wrong transmission(it was right after all!!!!!!!!)
yeah.....in my 92 bonneville se i had a F17 AND now i've got a FW2....the drivers side shaft won't fit ...if i get a new shaft, what else do i need to make this work?
any PCM changes?
thanks in advance..
James
any PCM changes?
thanks in advance..
James
#2
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Re: I got the wrong transmission
Originally Posted by BonnevilleSEman
yeah.....in my 92 bonneville se i had a F17 AND now i've got a FW2....the drivers side shaft won't fit ...if i get a new shaft, what else do i need to make this work?
any PCM changes?
thanks in advance..
James
any PCM changes?
thanks in advance..
James
you will need the PCM from the 3.06 trans, then you will be able to run the trans with out a problem
#3
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Jul 2004
Location: Diberville Mississippi
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
Re: I got the wrong transmission
Originally Posted by 1993 SLE
ok u can use the shaft from the old trans and use in in the new one....the cool thing is that you acutally got a 3.06 trans instead of the 2.84.....better accelleration with the 3.06
you will need the PCM from the 3.06 trans, then you will be able to run the trans with out a problem
you will need the PCM from the 3.06 trans, then you will be able to run the trans with out a problem
i hate this car..LMAO
james
#4
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Re: I got the wrong transmission
Originally Posted by BonnevilleSEman
Originally Posted by 1993 SLE
ok u can use the shaft from the old trans and use in in the new one....the cool thing is that you acutally got a 3.06 trans instead of the 2.84.....better accelleration with the 3.06
you will need the PCM from the 3.06 trans, then you will be able to run the trans with out a problem
you will need the PCM from the 3.06 trans, then you will be able to run the trans with out a problem
i hate this car..LMAO
james
it shouldnt be too hard to get the right parts
what year was the new trans from anyway??
#6
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Jul 2004
Location: Diberville Mississippi
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
well see that is the problem...i don't know...supposed to be a 92 pontiac bonneville SE
i ordered it through work. From a salvage company. the questions they asked were supercharged and if it had Traction control......i have neither....i don't know whats up.
James
i ordered it through work. From a salvage company. the questions they asked were supercharged and if it had Traction control......i have neither....i don't know whats up.
James
#7
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Jul 2004
Location: Diberville Mississippi
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
just went and checked again....the shaft indeed does not fit...any ideas guy ...i'm lost
little backstory..3 weeks ago we were rebuilding the engine..and found out it would cost me even more money...so i now have a new motor..and a new transmission...ti'* all in and the shaft won't fit
James
little backstory..3 weeks ago we were rebuilding the engine..and found out it would cost me even more money...so i now have a new motor..and a new transmission...ti'* all in and the shaft won't fit
James
#9
Senior Member
Posts like a Camaro
Thread Starter
Join Date: Jul 2004
Location: Diberville Mississippi
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1993 SLE
ok tis about time we get the pics goin'
can you take us some shots to see what were working with?
can you take us some shots to see what were working with?
James
#10
Senior Member
Certified GM nut
Join Date: Dec 2004
Location: Port Charlotte FLORIDA
Posts: 2,077
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BonnevilleSEman
Originally Posted by 1993 SLE
ok tis about time we get the pics goin'
can you take us some shots to see what were working with?
can you take us some shots to see what were working with?
James
oh ya gotta leave us hanging i c how it is.......
dont worry with the gear heads we have round here you should be back on the road in no time!!!!!