94 bonneville ssei serpentone belt replacent
 

Belt broke to supercharger. What do I need to remove to replace it. All help is greatly
appreciated. God Bless

Youll need a diagram of the belt for reference, and a 15mm socket on a ratchet or a 15mm wrench to pull the tensioner away to slip the belt on. super simple on the series 1, i can do it in 5 mins or less usually
best wishes

The tensioner pulley is spring loaded. Put a 15 mm socket or wrench on the bolt in the center of the pulley, and turn clockwise to release the tension and remove the old belt. Route the new belt over everything except the tensioner pulley, and use the wrench to re-position the tensioner pulley to where you can re-install the belt. Remove the wrench, and the belt is automatically set to the correct tension. The only tricky part is placing the belt so it is between the wrench and the pulley so you can slip it on when the pulley is re-positioned.

It really is only a 5 minute job.