Easiest way to change back spark plugs for 94 SE
03-04-2004, 09:20 PM
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2004
Location: cambridge,ontario
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Easiest way to change back spark plugs for 94 SE
just wondering if there was an easy way for me to change the back 3 plugs on my car, and how to change the wires as well.
Thanx
Thanx
03-04-2004, 09:36 PM
#2
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Up top, reach over the motor give the plug wires a quarter twist and pull straight back.
Change your plug wires one at a time as not lose place of what goes where?
Change your plug wires one at a time as not lose place of what goes where?
03-04-2004, 09:42 PM
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2004
Location: cambridge,ontario
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Thanx alot .The problem is that to change the wires I have to find a way to move the oil dip stick to remove the last to wires in the front,any advise on this :?
03-04-2004, 09:47 PM
#4
Junior Member
Posts like a Ricer Type-R
On a 94? The OIL dipstick, or trans dipstick? You shouldn't have to move anything. It'* a piece of cake. Should take 5 minutes for the front three, maybe 8 minutes for the back.
03-04-2004, 09:54 PM
#6
Junior Member
Posts like a Ricer Type-R
The bottom edge of the retainer has 2 tabs that lock it to the valve cover and prevent it from coming up.
Release these two tabs (one near each end about 1.5" in from each end), and slide the retainer UP towards you.
Release these two tabs (one near each end about 1.5" in from each end), and slide the retainer UP towards you.
03-04-2004, 10:27 PM
#7
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2004
Location: cambridge,ontario
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Thanx ,Ithought it was a fold down holder.found out about the clips by accident.This is the first FWD car I wanted to work on, the others were RWD F Bodies.
Thanx for the info
Thanx for the info
03-05-2004, 12:15 AM
#9
Senior Member
Posts like a Turbo
Join Date: Sep 2002
Location: B.C. , Canada
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
8 minutes Will...damnnn you slow for a young guy lmao :P kidddin ...its easy to change plugs...try changen` the blower motor ...looks easy ...pain in da butt 
