LIM Gasket Parts # Conflict
09-12-2007, 04:33 PM
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2007
Location: Illinois
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
LIM Gasket Parts # Conflict
I've been doing my research on other threads on this site in regards to the LIM gasket issues.
I have a 1996 Bonneville SE normally-aspirated.
The VIN is a "K" number.
This post: http://www.bonnevilleclub.com/forum/...e=article&k=38 references three part numbers for the LIM gaskets.
gmpartsdepartment.com tells me according to my VIN I should use 89017817 which are plastic and have no locating pins for the gaskets or end seals.
The above post recommends 89017816 which are the aluminum ones with locating pins.
Should I use what GM tells me or go with the aluminum which I would think are stronger/better?
I have a 1996 Bonneville SE normally-aspirated.
The VIN is a "K" number.
This post: http://www.bonnevilleclub.com/forum/...e=article&k=38 references three part numbers for the LIM gaskets.
gmpartsdepartment.com tells me according to my VIN I should use 89017817 which are plastic and have no locating pins for the gaskets or end seals.
The above post recommends 89017816 which are the aluminum ones with locating pins.
Should I use what GM tells me or go with the aluminum which I would think are stronger/better?
09-12-2007, 09:21 PM
#3
PopaDopaDo
True Car Nut
Ignore the parts people, get the part # mentioned for the aluminum framed, it may have been superceded now. I think I recall something like that.
Note that you won't have a use for the locating pins. See the article in Techinfo > Mechanical > Engine >95-03 Upeer Intake Failure information
Note that you won't have a use for the locating pins. See the article in Techinfo > Mechanical > Engine >95-03 Upeer Intake Failure information
09-12-2007, 09:33 PM
#4
Guest
Posts: n/a
Yes use the Aluminum gaskets...
They will fit on the blocks without the locating pins... I used the aluminum set on my 95 for a long time till I crapped the motor... They work just fine..
When you get ready to do the work, we will be able to help you with more questions and point you in the right direction
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
They will fit on the blocks without the locating pins... I used the aluminum set on my 95 for a long time till I crapped the motor... They work just fine..
When you get ready to do the work, we will be able to help you with more questions and point you in the right direction
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Thread
Thread Starter
Forum
Replies
Last Post