Wiper Motor
05-16-2004, 02:00 PM
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Nov 2002
Location: Greenville, SC
Posts: 421
Likes: 0
Received 0 Likes
on
0 Posts
Wiper Motor
I have a problem with the wiper motor i beleive. On the highest speed the wipers get slower and slower. I did a search, but could not find a write up. Does anyone have a write up of how to install/replace the wiper motor. thanks for the help.
05-16-2004, 02:23 PM
#2
Senior Member
True Car Nut
Join Date: Nov 2002
Location: Texarkana, Texas
Posts: 6,042
Likes: 0
Received 0 Likes
on
0 Posts
From the 93 book, should be the same. (page 8E-10)
Remove:
1. Washer hoses.
2. Wiper arm and blade assemblies.
3. Air inlet screen assembly (that black plastic peice under the wipers)
4. Drive link from wiper motor crank arm by loosening 2 drive link adjustment nuts (you' figure it out when you see it)
5. Electrical connectors.
6. Wiper motor while guiding crank arm through hole.
assembly is the reverse, tighten the wiper motor bolts to 9Nm or 80 lb. in.
Remove:
1. Washer hoses.
2. Wiper arm and blade assemblies.
3. Air inlet screen assembly (that black plastic peice under the wipers)
4. Drive link from wiper motor crank arm by loosening 2 drive link adjustment nuts (you' figure it out when you see it)
5. Electrical connectors.
6. Wiper motor while guiding crank arm through hole.
assembly is the reverse, tighten the wiper motor bolts to 9Nm or 80 lb. in.
Thread
Thread Starter
Forum
Replies
Last Post