I was wondering if anyone had any instructions or list of tools needed to remove the tranny out of my 95 bonneville. I found someone that is going to help me remove it. I would like to get this moving. Atleast getthe tranny out so when i do get money i have that part out of the way.

Tech info


http://www.bonnevilleclub.com/forum/...e=article&k=82

autozone will rent the 34mm axle nut.

Here are the original posts of how to remove and install the trans in a '95 SE with photographs:
'95 SLE trans removal with photos
95 SLE trans install with photos

Gameover is also a good source of previous posts regarding trans removal. I think he went through 3 in 3 months. All I remember is by the time you realized he was thinking about it, he was done.

If you don't have an engine hanger but do have a hoist you can pull the trans with the engine out from above. Here are instructions: http://www.bonnevilleclub.com/forum/...e=article&k=84

The engine hanger and sub-frame separation is an easier approach.

Thank you, i truely appriciate any and all help or comments

Double post

ha ha

are trannys are very easy to remove and put in