95 problem removing shifter knob
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: May 2009
Location: Minnesota
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
95 problem removing shifter ****
OK, I hope I am posting on the right thread page or whatever. I am trying to remove the floor shift **** on a 95 bonneville ssei I need to get the electronics panel ( seat adjusters, and ride electonics out so I can clean up a the mess someone left for me in my car. I'm afraid the connections are getting corroded. So if anyone can help I would truely appreciate it.
thank
jebonni
*** Moved from Other Rides ~ Kevin ***
thank
jebonni
*** Moved from Other Rides ~ Kevin ***
#2
DINOSAURUS BOOSTUS
Expert Gearhead
Piece of cake. Take a small screwdriver and your keys out to the car. Turn the igniton to on w/o starting, set e brake and shift the car to 1. Looking at the front of the shifter handle that faces the radio you will see a slot with a clip in it. Pull the clip out until the handle lifts off while pressing the button on the handle.
Put shifter in about normal D so that once you remove the two 7mm under the ash tray that whole piece will hinge up.
Put shifter in about normal D so that once you remove the two 7mm under the ash tray that whole piece will hinge up.
Thread
Thread Starter
Forum
Replies
Last Post