1995 SSEi Water pump nightmare!!
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Jan 2008
Location: Pennsylvania
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
1995 SSEi Water pump nightmare!!
Trying to replace water pump>and get idler pulley bracket assembly out of the way for wp bolt at 7 o'clock position>and trying to get ps pump out of the way to get middle pulley bracket bolt out .....ps reservoir clip is in the way of this bolt. Can clip be unclipped or does pump have to come loose?? Are pump bolts the two 10 mil @ 12 and 6?? They are screwed...vice grips not even working. Now what?
Help!
I will get pics on tonight if that helps.
Help!
I will get pics on tonight if that helps.
#2
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
The power steering pump bolts come out by turning the pulley so the hole is at 12 and then use a deep 13mm socket to remove it, then turn pulley to 6 and do the same. Don't drop the pump. It will brake the oil pressure sensor.
#7
Member
Posts like a V-Tak
Thread Starter
Join Date: Jan 2008
Location: Pennsylvania
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
PS pump pics
Dan, here is what I got. A) is the ps mounting bolt? One on top and bottom...mine are 10 mil and @$@$@, rounded! B) is the stupid clip blocking bolt C), which is blocking.............Water pump, lol.
#9
Member
Posts like a V-Tak
Thread Starter
Join Date: Jan 2008
Location: Pennsylvania
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts