Aluminum intake gaskets for 96 Se
#1
Aluminum intake gaskets for 96 Se
I keep reading that you should use the aluminum lower intake gaskets when changing them out, but when I type the part number( 89017816) in any GM part sites, it only lists the supercharged engine for the year 96. Are they not avaible for the SE models?
If thats the case Should I use GM or Felpro?
If thats the case Should I use GM or Felpro?
#2
DINOSAURUS BOOSTUS
Expert Gearhead
It'* a GM only gasket. Fel Pro will still by the nylon frame.
The part number is different between the supercharged and NA gasket sets. However, the parts are identical. I have had them side by side on teh parts counter for a comparision and they are identical. You can use either set in either motor w/o issues.
The part number is different between the supercharged and NA gasket sets. However, the parts are identical. I have had them side by side on teh parts counter for a comparision and they are identical. You can use either set in either motor w/o issues.
Thread
Thread Starter
Forum
Replies
Last Post
bill buttermore
1992-1999
38
04-12-2006 01:34 PM