delphi intake manfiold
11-02-2008, 02:01 PM
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Jan 2008
Location: rockford, illinois
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
delphi intake manfiold
I was just lookin at my engine and my intake manifold is a delphi does that mean that it was replaced already?
11-02-2008, 02:21 PM
#2
Member
Posts like a V-Tak
Join Date: Oct 2008
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Take a look at the date codes on the top of the manifold, I think if it was manufactured after 2003 it is a new version, but the GM parts "Delphi" are not as good a fix at the APN kits.
The best fix is to plug the LIM coolant ports that run coolant through the UIM and the throttle body and then don't worry about it. Unless you live in a very cold climate.
I had the updated delphi part on my 96SE and it exhibited the same problem as the old parts, I ended up sleaving it and plugging the ports.
James
James
The best fix is to plug the LIM coolant ports that run coolant through the UIM and the throttle body and then don't worry about it. Unless you live in a very cold climate.
I had the updated delphi part on my 96SE and it exhibited the same problem as the old parts, I ended up sleaving it and plugging the ports.
James
James
Thread
Thread Starter
Forum
Replies
Last Post
timothyt5
Audio (and aftermarket electronics)
3
05-18-2007 11:37 PM