92 bonny running again!!!!
#1
Junior Member
Posts like a V-Tak
Thread Starter
Join Date: Jan 2007
Location: hickory nc
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
92 bonny running again!!!!
hey guys i got her going again, we changed the fuel pump and then the crank sensor she runs really good now, but i have a few other things that maybe you guys can help with, i still have the problem with the gauges i have cleaned the cable ends good, the startup lights work (check engine,oil,seatbelt etc.) but none of the gauges work nor does the compass or driver info panel any ideas?
#3
RIP
True Car Nut
If all is connected, remove the cluster, take it apart, and clean up all connections. Also, check for small cracks in the solder around those connections and large parts on the board. Re-solder them just to be sure.
#4
DINOSAURUS BOOSTUS
Expert Gearhead
Here ya go, from the electrical section of Techinfo. This is the article Archon is eluding to.
http://www.bonnevilleclub.com/forum/...e=article&k=93
http://www.bonnevilleclub.com/forum/...e=article&k=93
Thread
Thread Starter
Forum
Replies
Last Post