getting to back 3 plugs
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Mar 2007
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
getting to back 3 plugs
friend has a 91 bonneville sse with the 3.8 , i assume it sits so the back 3 plugs are harder to get out (towards the fire wall), how do i get to them? i havent looked at it lately so bear with me if im wrong, i know on some of my gtps and other grand prixs you had to work at it alittle to get to them
#2
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Mar 2007
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
edit its a 90 dont think that matters though,
what plugs should she use and what wire set? looking for purely tune up stock nothing fancy
thanks again
what plugs should she use and what wire set? looking for purely tune up stock nothing fancy
thanks again
#3
Senior Member
True Car Nut
Join Date: Sep 2006
Location: Bloomington, MN
Posts: 3,693
Likes: 0
Received 0 Likes
on
0 Posts
the back 3 plugs arent too bad to get to at all, they should be pretty easy to get out.
for plugs use NGK and im not sure whats best for wires, i think belden is a good brand..
for plugs use NGK and im not sure whats best for wires, i think belden is a good brand..
#4
Senior Member
Posts like a Corvette
Join Date: Oct 2002
Location: New Jersey - Most of Our Elected Officials Have Not Been Indicted
Posts: 1,483
Likes: 0
Received 2 Likes
on
2 Posts
Re: getting to back 3 plugs
Two Words of Advice - Wear Gloves.
Also if you go with Delco Wires and Plugs, you can't go wrong
Also if you go with Delco Wires and Plugs, you can't go wrong
#5
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Mar 2007
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
lol i had gloves on and took them off for a sec and i got the nice bloody fingers,
got it done though, the wires she had in it were i think the originals, they practically crumbled in my hands and the plugs were torqued down extremely tight, i broke two of them in half but they luckly came out just fine
thanks
got it done though, the wires she had in it were i think the originals, they practically crumbled in my hands and the plugs were torqued down extremely tight, i broke two of them in half but they luckly came out just fine
thanks
Thread
Thread Starter
Forum
Replies
Last Post
raptor660
General GM Chat
6
09-16-2010 01:40 PM
TrueWildMan
Performance, Brainstorming & Tuning
20
06-15-2004 09:28 AM
Wolfedog50
Performance, Brainstorming & Tuning
3
05-08-2003 01:31 PM