Accessory belt routing!?!
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jun 2006
Location: Saginaw Michigan area
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Accessory belt routing!?!
So here is the problem...
I am a fiero guy, and im swapping the vin c engine into my fiero...
Fieros have no powersteering or in the case of my car, no AC...the engine i got came without an altenator, powersteering or ac pump...so i am clueless to the routing of the drive belt...
I am planning on only using the pulleys from the waterpump, crank, and altenator...
So if anyone could tell me the routing, or have a picture of it, so i know how to go about using only the altenator, and water pump, That would be GREAT!!!
I dont want to go running the waterpump backwards
Thanks,
Cody
I am a fiero guy, and im swapping the vin c engine into my fiero...
Fieros have no powersteering or in the case of my car, no AC...the engine i got came without an altenator, powersteering or ac pump...so i am clueless to the routing of the drive belt...
I am planning on only using the pulleys from the waterpump, crank, and altenator...
So if anyone could tell me the routing, or have a picture of it, so i know how to go about using only the altenator, and water pump, That would be GREAT!!!
I dont want to go running the waterpump backwards
Thanks,
Cody
#2
Let me try and find my FSM and see what it says. I didn't think there was an option for routing the belts without having AC on our cars.
I will let you know.
EDIT: Looks like your SOL, without getting a pulley to replace the AC compressor. The FSM only shows routing with AC, I guess AC was standard equipment on our bonnies.
I will let you know.
EDIT: Looks like your SOL, without getting a pulley to replace the AC compressor. The FSM only shows routing with AC, I guess AC was standard equipment on our bonnies.
#3
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jun 2006
Location: Saginaw Michigan area
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Well heres the thing...not using the Idler pully (I modified a bracket to make the altenator the tensioner) and im not using the powersteering, or AC...Ive got a belt that fits it corectly with the three pulleys... ( Crank, Waterpump and altenator) but i need to make sure that everything is spinning the right way...
Does the water pump spin counter clockwise???
Does the water pump spin counter clockwise???
#6
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jun 2006
Location: Saginaw Michigan area
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Wow that helped a ton! Thanks A TON! It works the way i have it set up...i will send you a picture through PM once my camera decides to work for me!
Thread
Thread Starter
Forum
Replies
Last Post