Intermittant EGR failure HELP??
03-08-2005, 11:13 PM
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Sep 2004
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Intermittant EGR failure HELP??
1988 Vin C 243XXX miles
I get the EGR codes 63, 64,65 after I go over the crest of a hill, at the same time that my converter unlocks. This is the only time I get these codes. I ran the test that the FSM called for on the EGR, results were fairly close to specs. I am thinking these codes are being produced by the lockup converter somehow. I recently cleaned the IAC.
Anybody got any clues??
I get the EGR codes 63, 64,65 after I go over the crest of a hill, at the same time that my converter unlocks. This is the only time I get these codes. I ran the test that the FSM called for on the EGR, results were fairly close to specs. I am thinking these codes are being produced by the lockup converter somehow. I recently cleaned the IAC.
Anybody got any clues??
03-08-2005, 11:54 PM
#3
Junior Member
Posts like a Ricer Type-R
For all 3 solonoids? I'd bet more on the ground. It won't be related to the TC unlocking at all. It'* strictly vacuum controlled on your year.
My suggestion is to clean the shafts and springs on the EGR and re-lube them with a temp-resistant lube. It can be done in place without removing it.
My suggestion is to clean the shafts and springs on the EGR and re-lube them with a temp-resistant lube. It can be done in place without removing it.
Thread
Thread Starter
Forum
Replies
Last Post