Anyone interested in lowering springs? I can get a set for your car for 249.00 if there is enough interest. The cost for individual kits otherwise is $500.00 that’s US dollars. I also have the ability to get a few more goodies for you but there has to be enough interest.

_________________
If you can't ab(use) it you can't afford it!

<font size=-1>[ This Message was edited by: speedyguy on 2002-05-24 20:20 ]</font>

with my 89 mostly fuel pump and computer /wiring troubles
but then again by the time i was done with it it had like 358K on it so that's to be expected :wink:

How many people who post here have a 87-91 Bonny? It's so quiet in here I guess there can't be many hehe. Anyways, what are the most common problems that u have had with your car? Personally I have only had my 90 SSE for 4 months now and so far I've replaced the alt, and fuel pump. But other then that the car runs and drives great! L8r...Andru.

<font size=-1>[ This Message was edited by: Blk_Bonneville on 2002-05-05 00:33 ]</font>

Hey good to know there are some performance parts out there for this style of Bonny. Unfortunately for me the motor just went in mine a couple of weeks ago so it's going to cost me about $1000 cdn. to get a used one put in. So much for having mod money!

What size were u thinking of? A lower profile and slightly wider tire would improve handling for sure. But depending on how much of a smaller diameter the tire is the car might take on a little bit of a 4x4 look. The speedo will also be a little bit off. Bottom line is just like almost everything else there are pro's and con's, hope this helps...L8r...Andru.

Would low profile tires look good on a '90 SSE without lowering it?

Would low porfile tires look good on a '90 SSE without lowering it?

'88 representing

Got an 89 SSE-and I love it!1 Has a few problems tho. bought it last year w/around 89,000 miles--of all places-from a junkyard!!!
How do you post pics here? Don't have any on the web.

I have an 89 LE :)

Gonna turn it into a sleeper sometime in the future, probably years in the future, ith a SC motor conversion.

I am planning on going with 16 inch wheels from a newer bonne and most likely 245/50 R16 tires. I am going to get one of these tires and have it mounted to see what kind of clearence and look issues I have. If there are too many problems I will go to 235/50 R16's.

Speedguy I would be somewhat intrested in the lowered springs but I don't hav the money to pay for that now and most likely won't for sometime.

I would be more interseted in the coil overs, probably a stage 1 kit, since I still have the original struts on my car and they are shot all to hell.