drivers information centre
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Apr 2003
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
drivers information centre
ok.. sometime ago.. my compass and my d.i.c stopped illuminating.. they both still worked. you could hear the d.i.c. but it wouldn't show anything.. i tried putting in another one and it still wouldn't work. i read on here to clean the contacts. i tried that the other day.. the compass is now working.. but the d.i.c. still doesn't show anything. does anybody have any other suggestions or can be more specific if there is another set of contacts that need to be cleaned or???
thank you all in advance
thank you all in advance
#3
Member
Posts like a V-Tak
Thread Starter
Join Date: Apr 2003
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
there is a plug on the left hand side of the dash. that'* the one that was recommended to clean. which i did.. i re and re'd the whole cluster to see if a different one would work. it did not. did the same thing as the original one so i put the original one back in for now. but now the compass works. and the dic still does not.. any suggestions?
#4
OK, the replacement cluster did the same thing. Is there a second plug with contacts that you could clean?
Next time you have it out, you could try something like this:
http://www.bonnevilleclub.com/techinfo/?article=56
Next time you have it out, you could try something like this:
http://www.bonnevilleclub.com/techinfo/?article=56
Thread
Thread Starter
Forum
Replies
Last Post
Dutch2005
Everything Electrical & Electronic
5
03-16-2005 11:01 PM