87 bonneville wont start
#2
Senior Member
Posts like a Turbo
Join Date: Jul 2007
Location: Joplin, Missouri
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
#3
Senior Member
Certified GM nut
Join Date: Jan 2007
Location: allentown, pa--brooklyn, ny
Posts: 1,646
Likes: 0
Received 0 Likes
on
0 Posts
Re: 87 bonneville wont start
Originally Posted by twentytwin
I just bought an 87 bonneville it cranks but won't start 93,000 miles new crank senser new coils new idle pos senser
also have you checked the starter or the ignition coil module...?
#5
87 bonne
I havn't checked it for codes its getting fuel just no spark it ran fine I shut it off and hasn't started since it cranks and cranks every once and a while gives alittle sputter
#7
Senior Member
Certified GM nut
Join Date: Oct 2005
Location: Western New York
Posts: 1,942
Likes: 0
Received 0 Likes
on
0 Posts
Check all the fuses - there'* some under the dash on the passenger side also.
Remove the coils, ICM & mounting plate from the mounting bracket. Clean the corrosion off the top of the bracket, both sides of the mounting plate & bottom of the ICM. Apply a little dielectric grease to all four sufaces & reassemble.
Let us know what you find. Do you have a voltmeter?
Remove the coils, ICM & mounting plate from the mounting bracket. Clean the corrosion off the top of the bracket, both sides of the mounting plate & bottom of the ICM. Apply a little dielectric grease to all four sufaces & reassemble.
Let us know what you find. Do you have a voltmeter?
#8
87bonne no start
I'm getting fuel to the fuel rail I tried starting it in nuetral it does nothing except the temp gage goes all the way up the coils are new and mounting plate are clean the person I bought it from said before it died it was losing power it was bogging down on the highway when he hit the gas
#10
Senior Member
Posts like a Turbo
Join Date: Jul 2007
Location: Joplin, Missouri
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like a weak/dead fuel pump to me.
Have you put a fuel pressure gauge on it? You should get about 40 lbs of pressure after the pump primes.
Have you put a fuel pressure gauge on it? You should get about 40 lbs of pressure after the pump primes.