It went bad again, what now?
#1
It went bad again, what now?
Ok, some of you may remember my recent thread about my brake lights not disengaging??
Now they won't engage.
I am planning on going down to checker again to get another switch.
Before I do that. Is there anything else that it could be?
Now they won't engage.
I am planning on going down to checker again to get another switch.
Before I do that. Is there anything else that it could be?
#2
Senior Member
Posts like a Camaro
Join Date: Jul 2003
Location: Orlando, Florida
Posts: 872
Likes: 0
Received 0 Likes
on
0 Posts
First, remove the connector from the brake switch on the brake pedal structure and with the key off, short the two leads together. If the brake lights come on, check the positioning of the switch (when pushing on the plunger can feel it make and break). If they do not come on, check that there is 12v on one of the leads. If not, the proplem is upstream of the swich, if there is then the problem is downstream.
Harbor Freight has a nice little DVM usually for $3.99. I have several.
Harbor Freight has a nice little DVM usually for $3.99. I have several.
#5
huh. thanks for the responses guys.
switch is fine, somehow the plug managed to wiggle its way out...so hah, i plugged it back in...and VOILA, whos got brake lights? I DO!
So thats good, i get to return that second brake switch.
switch is fine, somehow the plug managed to wiggle its way out...so hah, i plugged it back in...and VOILA, whos got brake lights? I DO!
So thats good, i get to return that second brake switch.
Thread
Thread Starter
Forum
Replies
Last Post
labonnevillastrangiato
General GM Chat
11
01-11-2008 08:42 AM
BonnieBrougham
Lounge
3
12-16-2004 05:38 PM