Some engine bay shots
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
Some engine bay shots
I moved some things, got rid of some things, and replaced some things.
For the intake, I cut & welded some 3.5" stainless pipe the wraped it in Home Depot duct stuff. Black header wrap is in the mail to go on top of this.
Heres my battery moved forward and a smaller coolant tank.
And it'* kind of hard to see but I mounted my evap canister behind my drivers headlight in the bumper. I still gotta clean up the cuts I made from when I had ram air.
I want to make my engine bay as simple as possible.
I still want to polish some things like the alt, tensoner assembly, fuel rail, and throttle body. And I want to try and hide/tuck as many wires as possible.
So..What do you think?
For the intake, I cut & welded some 3.5" stainless pipe the wraped it in Home Depot duct stuff. Black header wrap is in the mail to go on top of this.
Heres my battery moved forward and a smaller coolant tank.
And it'* kind of hard to see but I mounted my evap canister behind my drivers headlight in the bumper. I still gotta clean up the cuts I made from when I had ram air.
I want to make my engine bay as simple as possible.
I still want to polish some things like the alt, tensoner assembly, fuel rail, and throttle body. And I want to try and hide/tuck as many wires as possible.
So..What do you think?
#3
Guest
Posts: n/a
He has an SSE Bumper on there now... I like that shade of Blue
How did you manage to move the battery foward?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
How did you manage to move the battery foward?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#6
Senior Member
True Car Nut
Thread Starter
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jr's3800
He has an SSE Bumper on there now... I like that shade of Blue
How did you manage to move the battery foward?
How did you manage to move the battery foward?
With the battery, I couldn't move the tray for some odd reason.:? But If I loosened the 13mm bolt holding the battery down, it slid forward and backward untill it hit the front or back of the tray. So, I cut the little front lip of the tray, slid it forward almost as far as it would go (about an inch or less) and tightened the 13 mm bolt back up. It feels just as tight as it did before.
Thanks for the comments.
Thread
Thread Starter
Forum
Replies
Last Post
FiReDeViL
Your Ride: GM Pictures & Videos
15
06-03-2004 09:51 PM
Sol
Your Ride: GM Pictures & Videos
17
03-05-2004 09:47 PM
zzzzzeke
Your Ride: GM Pictures & Videos
13
02-13-2004 01:23 PM
Jeep2Bonny
Your Ride: GM Pictures & Videos
17
05-07-2003 03:31 PM