Just finished up installing my Silverstar'*...9006ST is the model.
Before Install (stock lights)
One installed (SS on left, Stock on right)
Both installed (Silverstar 9006ST)
For those of you with a 2000+ model who wish to do this it is very easy.
There are 2 bolts that hold the entire headlamp assembly in place. Remove
these 2 bolts and you can pull the headlight assembly forward. It is held to
the side of the car with a small ball clamp but should just pull straight out
with the 2 bolts removed. The wire assembly comes with it and is attached
to the car by a one socket connection making it easy to pull the unit out
without having to discconnect all the bulb wires. Here is a pic.